Go

S30A electric light truck power assembly

    1. Leading design concept

    It is the first in China to put forward the integrated design concept of electric motor, electric control and gearbox, and realize industrialization to reach the international first-class design level。

    2.  Superior cost

    The integration of electric control of motor can reduce the length of three-phase line, three-phase line connector and water pipe; at the same time, the integration of electric control of motor can reduce the sub assembly process of main engine plant, greatly reduce the cost of main engine plant and improve production efficiency。

    3.  High standard product design requirements

    The power density of power assembly products shall meet the requirements of national standards in 2020, and the electromagnetic compatibility shall meet the level 3 standard of GB / t18655。

    4.  Efficient assembly and debugging

    Through the integrated design, the assembly station of the production line is reduced and the working efficiency is improved。

    5.  Leading design and development method in China

    Based on model definition, model simulation, model code generation technology, and AUTOSAR software architecture standard, a modular design scheme with high cohesion and low coupling is realized。

    6.  Complete fault diagnosis and treatment mechanism

    Analyze 5 kinds of data objects, establish 18 kinds of fault models, form 32 kinds of fault types, generate 128 system level fault codes, and set up 4-level fault protection processing mechanism。

    7.  Intelligent parameter identification and self-learning ability

    Realize the off-line identification and automatic calibration of control parameters, reduce the calibration time by more than 70%。

    8.  Reliable long-term durability test

    The series of products are equipped with more than 10000 electric vehicles in total, with a running time of more than 5 years and a single vehicle experiencing a durability test of 500000 km。

  • Parameters

    1. Leading design concept

    It is the first in China to put forward the integrated design concept of electric motor, electric control and gearbox, and realize industrialization to reach the international first-class design level。

    2.  Superior cost

    The integration of electric control of motor can reduce the length of three-phase line, three-phase line connector and water pipe; at the same time, the integration of electric control of motor can reduce the sub assembly process of main engine plant, greatly reduce the cost of main engine plant and improve production efficiency。

    3.  High standard product design requirements

    The power density of power assembly products shall meet the requirements of national standards in 2020, and the electromagnetic compatibility shall meet the level 3 standard of GB / t18655。

    4.  Efficient assembly and debugging

    Through the integrated design, the assembly station of the production line is reduced and the working efficiency is improved。

    5.  Leading design and development method in China

    Based on model definition, model simulation, model code generation technology, and AUTOSAR software architecture standard, a modular design scheme with high cohesion and low coupling is realized。

    6.  Complete fault diagnosis and treatment mechanism

    Analyze 5 kinds of data objects, establish 18 kinds of fault models, form 32 kinds of fault types, generate 128 system level fault codes, and set up 4-level fault protection processing mechanism。

    7.  Intelligent parameter identification and self-learning ability

    Realize the off-line identification and automatic calibration of control parameters, reduce the calibration time by more than 70%。

    8.  Reliable long-term durability test

    The series of products are equipped with more than 10000 electric vehicles in total, with a running time of more than 5 years and a single vehicle experiencing a durability test of 500000 km。

Pure electric / plus 4.5t blue light truck。

Pure electric / add-on 7.5t yellow light truck。

At present, the cooperative main engine plants: Hengtian new chufeng, Dongfeng Motor, Beiqi Futian, FAW Hongta, Shandong Lichi, Shaanxi Automobile Baohua


model

Motor rating/peak power(kw)

Rated input voltage(VDC)

Motor rated/peak torque(N.m)

Motor rated/peak speed(rpm)

speed ratio

Cooling mode

e-power70

70/100

336/540

335/800

2000/4000

Direct drive

Direct liquid cooling

e-power80

80/120

336/540

550/1100

1400/5100

Direct drive

Direct liquid cooling

e-power53A/B

53/105

336/540

127/280

4000/12500

3.032

Direct liquid cooling

e-power60A/B

60/120

336/540

144/330

4000/12500

3.032

Direct liquid cooling

e-power55AMT

55/110

336/540

220/400

2400/6000

4.717/2.513 /1.979/1

Direct liquid cooling


S30A electric light truck power assembly
Long press to look detail
Long by picture save/share
INQUIRY

enquiry form:

  • Please enter the verification code

Inquiry Content:


You have no items to require

Add Successfully

S30A electric light truck power assembly

Inquiry
INQUIRY

enquiry form:

  • Please enter the verification code

Inquiry Content:


You have no items to require

Add Successfully
  • Company *

  • Telephone *

  • Message *

  • Submit

Quick access

Product Center

Solution

About us

NEWS

Contact Information

Address:Building 4, New Energy Vehicle Industrial Park, Jinque Road, Jinsha Community, Kengzi Sub-district, Pingshan District, Shenzhen
TEL:0755-28398380 / 0755-28398382

E-mail: sales@espiritek.com


图片展示

scan,Focus on us

联系方式

地址:深圳市龙岗区宝龙六路新中桥工业园C栋3楼

电话:0755-28398381

邮箱:info@espiritek.com

图片展示

COPYRIGHT © 2020 深圳市依思普林科技有限公司 工商网监

技术支持:联兴互动

Service Center

Please choose online customer service to communicate

Contacts
全国热线
0755-28398380
Scan a QR Code
Qrcode
扫码关注
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.